Sale!
BUP.V1230

1230 Litre Vertical Plastic Bunded Oil Tank

Rated 0 out of 5
(0 reviews)

2 to 5 working days, next day delivery available at an additional £55 per tank (subject to stock availability, T&Cs apply)

£1,195.00 Ex VAT£1,434.00 Inc VAT

2 in stock

You may also need

Contents Gauge

Clock face tank contents gauge
Clock Face Tank Contents Gauge 4ft

£24.00 Ex VAT£28.80 Inc VAT

APOLLO ULTRASONIC
Apollo Ultrasonic Tank Contents Gauge

£91.00 Ex VAT£109.20 Inc VAT

Watchman Sonic Tank Contents Gauge
Watchman Sonic Tank Contents Gauge

£128.00 Ex VAT£153.60 Inc VAT

Bottom Outlet Filter Pack

economy oil tank filter pack
Economy Filter Pack

£20.00 Ex VAT£24.00 Inc VAT

Advanced Filter Pack
Advanced Filter Pack

£48.00 Ex VAT£57.60 Inc VAT

Advanced 90 Degree Filter Pack
Advanced 90 Degree Filter Pack

£56.00 Ex VAT£67.20 Inc VAT

Advanced 90 Degree Tee Filter Pack
Advanced 90 Degree Tee Filter Pack

£106.00 Ex VAT£127.20 Inc VAT

Advanced Straight Tee Filter Pack
Advanced Straight Tee Filter Pack

£99.00 Ex VAT£118.80 Inc VAT

Advanced Parallel Tee Filter Pack
Advanced Parallel Tee Filter Pack

£114.00 Ex VAT£136.80 Inc VAT

This tank has required sections which must be completed before you can add to basket.

SKU: BUP.V1230 Category:

Description

1230 Litre Vertical Plastic Bunded  Oil Tank – BUP.V1230
Tank & Bund:

A 1230 litre vertical plastic bunded oil tank which is suitable for both domestic and commercial applications.

The liquid is stored in the primary or inner tank and the outer tank forms the required bund with capacity for 110% of the primary tank’s capacity. This tank is suitable for the storage of heating oil, kerosene, diesel, waste oils, water and many other liquids (please check before usage).  A bunded tank is a tank within a tank, as a result, the outer tank provides protection for the inner tank making it harder for the inner tank to fail but in the unlikely event of the inner tank failing, the outer tank will provide secondary containment.

This tank is manufactured in the UK and is moulded from Polyethylene using a rotational moulding process which produces a stress-free product. Furthermore, the Polymer used includes additives which make it resistant to harmful UV rays from the sun and with correct installation and general on-going care, these products have a long life ahead of them with very little or no maintenance required.

Compliance:

This tank complies with OFTEC requirements, Oil Pollution Prevention Guidelines (England & Wales) 2002 PPG2 and carries CE approval (The CE number is present on the tank).  As a result, this tank complies with current environmental standards.

Specifications:
  • 1230 litre (270 galls) capacity
  • 2” fill point
  • 4” inspection hatch (screw cap)
  • 18” lockable outer bund lid
  • 1” bottom outlet (top outlet tanks are available, contact us for more info)
Warranty:
  • 12-year warranty, each tank is provided with a warranty manual
Dimensions:
  • Diameter: 1250mm
  • Height: 1555mm
  • Weight: 92kg
Recommended Base Size:

We recommend along with current regulations a base size which extends 300mm all the way around the tank

  • Length: 1850mm
  • Width: 1850mm

You can call our sales team for product advice on 0330 999 1100 or more information about the regulations that surround oil storage can be found on the OFTEC website here

Advice

No. Today, no openings (other than the tank outlet) are permitted below the maximum level of fuel in any oil tank. This reduces the risk of accidental spillage. In the event that contaminants (e.g. water) need to be removed from an oil tank, they should be removed by an appropriately licensed contractor via the inspection aperture fitted to the tank.


Related Products

All plastic oil tanks must be installed on a flat, level and fire resistant base capable of supporting the weight of the tank when fully laden. If concrete slabs are used, they should be a minimum of 50mm thick. The base should extend at least 300mm beyond the widest points of the tank and fully support the base of the tank in its entirety. Piers are not suitable for this purpose and can cause irreparable damage to the tank.


Related Products

Oil tanks with a nominal capacity not exceeding 3,500 litres should not be fitted any closer than 1.8 metres to a non-fire rated (30 minute minimum fire resistance) wall or eaves. Where these clearances cannot be achieved, the measures noted in British Standard BS5410 and OFTEC Technical Instruction Book 3 must be provided – i.e. the provision of a 30 minute (minimum) fire resistant wall which extends at least 300mm above and beyond the ends of the oil tank. It will be necessary to protect exposed eaves forming part of a roof within 1.8 metres of the top of an oil tank to provide a minimum of 30 minutes fire resistance. Cladding can be applied to the eaves in order to prevent fire from spreading to the roof.

For oil tanks with a capacity of 3,500 litres or greater, please contact your local Building Control Officer or OFTEC.


Related Products

Oil tanks with a nominal capacity of less than 3,500 litres should not be placed within 1.8 metres of a flu outlet. Where these distances cannot be achieved, the protection measures noted in OFTEC Technical Instruction Book 3 and British Standard BS5410 must be provided by means of a 30 minute fire resistant wall which extends a minimum of 300mm above and beyond the ends of the tank. For oil tanks with a nominal capacity of 3,500 litres or greater, please contact your local Building Control Officer or OFTEC.


Related Products

If the oil tank has a nominal capacity of less than 3,500 litres, it should not be placed any closer than 760mm to a boundary. This assumes that there are no flu outlets or buildings between the tank and the boundary. Where these distances cannot be achieved, the protection measures noted in OFTEC Technical Instruction Book 3 and British Standard BS5410 must be provided by means of a 30 minute fire resistant wall which extends a minimum of 300mm above and beyond the ends of the oil tank. For oil tanks with a nominal capacity of 3,500 litres or greater, please contact your local Building Control Officer or OFTEC.


Related Products

Delivery information

Standard Delivery

Our standard delivery service offers a 2-5 day service. We always aim to deliver using our own transport but may sometimes use a third party carrier should circumstances dictate. This is a kerbside delivery service and includes offload

  • 2-5 day service
  • Own transport (where possible)
  • Kerbside delivery
  • Includes offload
Collection Service

Collection is available from either our Durham, Kemble or Ely depots. We recommend you provide 24 hours notice so that we can prepare your order. In some circumstances, you may recieve a discount relating to the carriage cost element.

  • Collect from Durham, Kemble or Ely
  • Discounts Available
  • Quicker lead times

Reviews

There are no reviews yet.

Be the first to review “1230 Litre Vertical Plastic Bunded Oil Tank”

There are no products in your basket.